0

What should be considered when buying an SSD?

Data storage unit in computers The technologies of SSDs are wondered by users. “What is an SSD, what is it for, what are its advantages? What are the differences between SSD and HDD? What should be considered when buying an SSD? ” such questions are asked very often. The SDN editor has compiled the answers to all these questions.

What is an SSD? What does it do?

One of the popular hardware today SSD (solid-state drive), Although basically similar to flash drives, it is more reliable and faster due to structural differences. Usually NAND SSDs with the so-called chips are more efficient and it works fast.

SSD disks, which perform the same task as HDD, take over the data storage operations of computers. SDD models, which come up with different connectors and technologies, can reach a speed of 6.8GB / s.

What are the types of SSDs?

SSD types SATA, PCIe, M.2, U.2, mSATA, SATA Express We can divide it into 6 categories. Commonly used SATA, PCIe and M.2 SSD models have serious differences in performance.

What is an SSD?  What are its types and advantages?  What does an SSD do?  What are the differences between SSD HDD?

Due to SATA technology 600 MB / s SATA SSD models, which are limited by, are known as the slowest SSD type. NVMe (Non-Volatile Memory Express) supported SSD models, PCIe and M.2 SATA It comes up with 2 different types, including the connector.

Reading and writing speeds of models with M.2 SATA connectors are very low compared to PCIe models. For this reason, we recommend you to use NVMe M.2 SSD models with PCIe connectors if your motherboard supports it.

What are the advantages of using SSD?

After the questions of what is SSD and what are its types, another one of the most curious ones is its advantages. Promising more speed than HDD, SSD technology has many advantages such as silence and long life, apart from speed. SSD disks built on the microcontroller basis will not cause any sound problems in long usage scenarios. In addition, the technology, which comes with a longer life with the developing technology, exceedingly meets the needs of the users.

SSD solutions are widely used in many companies, including data centers and cloud storage platforms because of their advantages.

What are the differences between SSD and HDD?

HDD technology stores data thanks to the discs in the device. As SSD stores data on the microprocessor used, it makes computers run quieter. Since data is written to the disk in the HDD, the disks inside are damaged after any physical impact. In SSD technology, since there are no moving parts, devices suffer less damage in such cases.

SSD devices thanks to the technology used 6.8GB / s HDD users are the most 480 MB / s can have speed. On the other hand, when your SSD device is corrupted due to the technology used, your data recovery possibility will be lower than HDD.

What should be considered when buying an SSD?

When buying an SSD, attention should be paid to the data read-write speed of the device. This criterion is written on the device and the high speed is directly proportional to the quality of the SSD. Today, the read-write speed of SSDs varies on average between 300-500MB / Sec. When buying an SSD, you should also consider its intended use. It would be appropriate to choose an SSO with the appropriate storage volume according to the size of the data you want to transfer on the SSD and the purpose of using the data. Buying an SSD above the data storage capacity you will use while purchasing an SSD also positively affects memory usage.

You can write your thoughts on SSD usage and performance in the comments.

Editor

Leave a Reply

Your email address will not be published. Required fields are marked *